
Ductless Mini-Split (Single Zone) cost in 2026
What a ductless mini split involves, what it runs in each state we build in, what moves the price, and how to price it for your ZIP code.
What the project involves
A single-zone ductless mini-split pairs one outdoor heat pump with one indoor head to heat and cool a room, addition or shop without ductwork. Installed prices are fixed packages — Good, Better and Best equipment tiers from IDB HVAC Solutions — with adders only for things like a new circuit, a condensate pump or a rooftop unit.
Because these are package prices, the calculator asks about the space, the mount style, drainage, the electrical circuit and the home's height, then shows the three packages that fit.
This guide prices the work on our HVAC, Plumbing, Electrical service page, installed by our sister company IDB HVAC Solutions.
What's included
At the standard finish level, the range covers:
- The Mitsubishi equipment listed on the package card — one outdoor heat pump and one indoor head
- Installation labor, startup and commissioning, with up to 20 feet of line set, vacuum and charge
- A wireless remote, and a wall controller on cassette systems
- Haul-away and disposal of the old equipment when there is any
- Manufacturer registration for the parts warranty, plus a one-year labor warranty from IDB HVAC Solutions
- The adders shown on the card — permit, dedicated circuit, line-hide — only when they apply to your home
Across our four states
Prices as of Nov 4, 2026
| State | Priced at | Installed |
|---|---|---|
| Washington | Seattle · typical answers | $3,785 – $5,415 installed |
Planning-level ranges from our current pricing tables, standard finish at a typical size unless a column says otherwise. Land, design and permit fees, utility connections and unusual soils are priced separately.
What drives the cost
- 1
Room size
Packages are sized to the space: a 9k BTU head for up to about 350 sq ft, 12k for 350–650 sq ft and 18k for 650 sq ft and up. In the current sheet the Good wall-mount package runs $3,390 at 9k, $3,580 at 12k and $4,280 at 18k installed.
- 2
Good, Better or Best
Good is the Mitsubishi HX Pro series; Better is the GX series with Wi-Fi-ready control; Best is the FX Hyper-Heat H2i, rated to heat at -13°F with a base-pan heater. At 12k the three run $3,580, $4,610 and $5,440 installed.
- 3
Indoor unit style
A wall-mounted head is the baseline. A ceiling cassette costs more for the equipment and the ceiling work: the four-way cassette 9k package runs $5,720 with a standard outdoor unit and $6,110 with Hyper-Heat.
- 4
Electrical
Most installs need a dedicated 240V circuit and disconnect from the panel; when you don't already have one, the card adds $650 for a licensed electrician.
- 5
Permit and inspection
The mechanical permit plus the L&I electrical permit and inspection are listed as a $395 adder on every package.
- 6
Site details
A paintable line-hide cover kit adds $350, a wall bracket instead of a ground pad $225, a condensate pump $275 when the indoor unit can't drain by gravity, and a crane or lift $650 for rooftop or third-story outdoor units.
- 7
Single zone or multi zone
This guide prices a single indoor head. When you want to condition several rooms, a multi-zone system puts two to five indoor heads on one outdoor unit — a separate package type in the calculator, priced the same fixed-price way, and usually less than two or three single-zone systems side by side.
Seattle-area pricing
Ductless packages are fixed installed prices from the current equipment sheet, so they do not move with the Puget Sound, Seattle and Eastside tiers the way a remodel does. What changes by location is the permit — Seattle's SDCI mechanical permit versus a county permit — and whether a rooftop or upper-level outdoor unit needs a lift. Prices are valid for the days shown on the card and are confirmed at a free site visit; Washington sales tax is shown separately.
Permits and fees
Usually priced separately from the range above:
- Permit and inspection — the city or county mechanical permit plus the L&I electrical permit, listed as an adder on every package
- Electrical panel or service upgrades beyond a dedicated circuit
- Drywall, paint or finish repair beyond the equipment footprint, and any structural changes, new chases or soffits
- Asbestos or hazardous-material abatement; utility rebates and tax credits are listed separately when known
Ways to save without cutting corners
- 1
Size to the room, not the house. A single-zone head is the right tool for a bedroom, office, addition or shop; for several rooms, a multi-zone system shares one outdoor unit.
- 2
Choose Hyper-Heat if the mini-split is your only heat. The Best tier is rated to -13°F; the Good and Better tiers are standard-ambient units.
- 3
Place the outdoor unit within 20 feet of the head. The package includes up to 20 feet of line set; longer runs and line-hide add cost.
- 4
Check for an existing 240V circuit before you book. If one is already there you skip the $650 electrical adder.
- 5
Pick a wall-mounted head unless the room really needs a cassette. The ceiling cassette packages cost more for the equipment and the ceiling framing, and the wall unit heats and cools the same room.
Questions, answered
Book your free professional advice visit
Free estimate. Free 3D design model. Free on-site advice from the builder who prices the job. No obligation.
