
Water Heater Replacement cost in 2026
What a water heater replacement involves, what it runs in each state we build in, what moves the price, and how to price it for your ZIP code.
What the project involves
A tank water heater replacement swaps a 40–75 gallon gas, propane or electric tank, brings the venting, pan, expansion tank and seismic strapping up to current code, and hauls the old unit away. IDB Plumbing Solutions prices these as fixed installed packages.
The calculator asks about fuel, capacity and where the heater sits, then shows the packages that fit. Where no package is priced yet for your answers, we quote it by hand within one business day.
This guide prices the work on our HVAC, Plumbing, Electrical service page, installed by our sister company IDB Plumbing Solutions.
What's included
At the standard finish level, the range covers:
- The equipment and materials listed on the package card — a 40- to 75-gallon gas, propane or electric tank, or a gas or electric tankless unit
- Installation labor, a pressure test and startup
- Haul-away of the old water heater
- Permit and inspection when shown as an adder
Across our four states
Prices as of Nov 4, 2026
Water Heater Replacement work is priced as fixed installed packages rather than a per-state range. Answer the calculator's questions to see the packages that fit your home, or book a free visit and we will quote it by hand within one business day.
What drives the cost
- 1
Tank or tankless
A like-for-like tank replacement is the simplest job: the water, gas or power and the venting are already where the new unit needs them. A tank-to-tankless conversion adds venting, gas-line and electrical work, which is why the calculator asks whether you are replacing a tank, an older tankless unit or installing new, and whether a 3/4-inch gas line is already near the install spot.
- 2
Fuel
Natural gas, propane and electric units each carry their own equipment and venting requirements. Staying with the fuel you have keeps the job a replacement; switching fuel adds the new gas supply or the new electrical circuit, and sometimes a panel check.
- 3
Capacity
The qualifying questions step through 40-gallon, 50-gallon and 75-gallon-or-larger tanks, and a larger tank means a larger unit and sometimes a larger vent. For tankless, the number of bathrooms (one to four or more) sets the flow rate the unit has to deliver at once.
- 4
Where it's installed
The qualifying questions ask whether the heater sits in a garage, a closet or utility room, a basement or crawlspace, or an attic — each adds access and protection work over a garage install.
- 5
Gas line and venting
Tankless units usually need a 3/4-inch gas line and new venting; when they aren't already there, that work is the largest add to the job.
- 6
What the old install left behind
Anything the inspector requires that the old install lacked is priced at the free site visit, not guessed at online.
Seattle-area pricing
Water heater packages are fixed installed prices from the current equipment sheet, so they do not move with the Puget Sound, Seattle and Eastside tiers the way a remodel does. What changes by location is the permit — a Seattle plumbing permit versus a county permit — and the access conditions of the home. Prices are valid for the days shown on the card and confirmed at a free site visit; Washington sales tax is shown separately.
Permits and fees
Usually priced separately from the range above:
- Permit and inspection — the plumbing permit, and a mechanical or electrical permit where fuel or venting changes, listed as an adder when it applies
- Drywall, paint or finish repair beyond the work area
- Concrete cutting or trenching unless shown as an adder
- Asbestos or hazardous-material abatement, and water-damage or mold remediation from a failed heater
Ways to save without cutting corners
- 1
Replace like for like unless you have a reason to switch. A tank-to-tankless conversion adds gas-line, venting and electrical work that a straight tank swap doesn't.
- 2
Replace before it fails. A planned replacement is a scheduled visit; a leaking tank adds water-damage cleanup that is priced separately.
- 3
Match capacity to the household. A 50-gallon tank or a tankless unit sized by bathroom count avoids paying for hot water you never use.
- 4
Keep the heater where it is. Relocating adds plumbing, venting and sometimes electrical runs that a replacement in place doesn't need.
- 5
Answer the qualifying questions accurately. Fuel, tank size, location and whether a 3/4-inch gas line exists are what the fixed price is built on, and a surprise at the site visit becomes an adder.
Questions, answered
Book your free professional advice visit
Free estimate. Free 3D design model. Free on-site advice from the builder who prices the job. No obligation.
